omniture

BT-LUX releases an amazing "Quadruple-proof" LED panel light: S16-H Series

Shenzhen Bentuo Electronic Technology Co., Ltd
2017-08-04 21:15 4299

-Featured with heat dissipation through aluminum back plate and variety of installation solutions with 360° sliding nuts.

SHENZHEN, China, Aug. 4, 2017 /PRNewswire/ -- Shenzhen Bentuo Electronic Technology Co., Ltd (BT-lux), a professional vendor of high-end panel lights in Shenzhen, recently released a "Quadruple-proof" panel light, S16-H series. Here Quadruple-proof means waterproof, dust-proof, fire resistant and air-purifying. This type of panel light is not only designed with a unique structure of heat dissipation through the whole back plate and 360° sliding nuts for various installation methods, but also it avoids traditional treatment with glue around the panel light and it adopts a new technology of a gasket ring. On one hand, it keeps the same appearance with the traditional one, but it includes a better water resistance of up to IP66. However, on the other hand, its temperature rises only 30 degrees centigrade at most, which perfectly solves the common problem of heat dissipation for a waterproof panel light with glue treatment. Most importantly, in contrast with other similar products, the cost of a S16-H series panel light is only 50% as much as others, which is more competitive.

Unique design of heat dissipation and installation methods

As we know, for traditional panel lights, the LED light bar (light source) is directly stuck onto the aluminum frames, through which heat dissipates. The area for heat dissipation is so small that the temperature usually rises up to 60 degrees centigrade. After long term use, it will have greater levels of light decay. The S16-H Series panel light uses the whole aluminum back plate to dissipate heat. The LED light bar is placed onto the bending parts of the aluminum back plate, therefore the whole back plate can be the heat dissipation area. The thermal image shows the highest temperature is only 30 degrees centigrade. This significantly helps increase the longevity of the light. In addition, the joints of the bending parts of the aluminum back plate are not closed. This type of design is good for reducing pressure from the light guide plate and protecting the LEDs from being destroyed from LGP in high temperatures due to its physical expansion and contraction. BT-lux's panel light is designed with a screw-free structure patent, instead of too many screw designs from other vendors. Each unit comes ready to install in standard drop-down ceiling grids. Additional mounting hardware is available for alternative installation types, such as recessed, suspension and surface mounted.

Water spraying resistant, dust proof and fireproof design

Thanks to the unique structure design, our S16-H Panel light adopts a new sealing technology with gasket rings rather than a traditional treatment with glue around the panel light. The panel light has passed the strict water spraying resistant (IP66) and dust proof tests from the authoritative laboratory, but also carries forward the advantages of heat dissipation and an elegant appearance as before. Under the circumstances that fire resistant panel lights are required, it can be changed with a PC diffuser, made with V0/V2 fire resistant grade materials.

Air-purifying Features

To meet some particular needs of sterilization and air purification, the S16-H air-purifying panel was designed for these purposes. These innovative LED panel lights combine efficient energy saving lighting with high standards of hygiene, clean air and low bacterial load. The principle of operation is based on an internationally accepted scientific method of sterilization photo catalyst, normally TiO2. It is powder coated on the S16-H panel and it performs extraordinarily well in catalyzing and reducing harmful organic substances when it is under the light irradiation. It can kill various bacteria in air and reduces the toxins produced from the bacteria and the fungi. On top of this, it also has deodorization and anti-pollution functions. The coating is not harmful and thus is widely used in schools, offices, medical industries, food industries, aseptic dust-free workshops and supermarkets. This product has passed all-around tests from a professional and authoritative institutes.

"The product has earned lots of compliments and good feedback since its creation. It covers the shortage of similar products. Some of them are ugly-looking, some are bad at dissipating heat, and others are too expensive," said by Mr Joe, CEO of BT-LUX. He also added that more products are available in BT-LUX. They are good in the aspects of appearance design and practicality. You are welcome to visit or request a sample. For more information, please go and visit our web site www.bentuolighting.com or call us at +86-755-2995-5993.

Company profile

BT-lux was established in 2009. Its headquarter is located in Shiyan, Shenzhen, covers an area of 6000 sqm and has a staff of 200 employees. In 2017, a warehouse was set up in Los Angeles, for fast delivery and better service. BT-lux meets internationally recognized ISO9001:2008 standard and believes that "full participation for the best quality." Most of the products have passed UL, DLC, TUV, RoHS and other standards. Abundant experience in the electronics industry, strict production management and perfect after-sales management makes BT-lux a world-class brand. We will create greater value for our customers by continuing innovative and high quality products.

Shenzhen Bentuo Electronic Technology Co., Ltd.
Add: 2-3/F, Building No.26, Shancheng Industrial Area, Shixin Community, Shiyan Town, Baoan District, Shenzhen, China
Tel: +86-755-2995-5993
Mail: Dave@bentuolighting.com 
Skype: davybentuo

View original content:http://www.prnewswire.com/news-releases/bt-lux-releases-an-amazing-quadruple-proof-led-panel-light-s16-h-series-300498926.html

Source: Shenzhen Bentuo Electronic Technology Co., Ltd
collection