omniture

Stena RoRo has now taken delivery of the lengthened vessel Stena Scandica from the Turkish shipyard

Stena RoRo
2021-06-18 17:25 2479

STOCKHOLM, June 18, 2021 /PRNewswire/ -- In August 2020, Stena RoRo began a unique conversion of the RoPax vessel Stena Scandica (formerly the Stena Lagan) and has been responsible for design and project execution. The ship was split in half and a new 36-meter-long mid-section inserted. As a result, cargo capacity has been increased by 30 percent. Completion of the conversion was marked with a ceremony at the shipyard in Tuzla, outside Istanbul. After a 10-day maiden voyage, the Stena Scandica will enter service at the beginning of July on Stena Line's route between Nynäshamn and Ventspils in Latvia.

Modernization and increased capacity

The extensive refurbishment increases both the cargo and passenger capacity of the ships. The 36-meter-long mid-section gives the ship a new total length of 222 meters and a capacity of 2875 cargo meters, entailing an increase in capacity by 30 percent. With the refurbishment, the number of cabins has been increased by 80 to a total of 202. The ship's interior has been modernized and expanded with new shops, as well as passenger lounges and a new sundeck aft. The passenger capacity now stands at 970 passengers.

"Extending a vessel is a cost-effective way of increasing cargo capacity, while gaining room for more passengers," says Per Westling, managing director for Stena RoRo AB. "The new interior design and application of modern technology entail an upgraded passenger concept, with more efficient operation and reduced emissions per cargo unit."

The conversion includes a new bow section enabling drive-through loading and unloading simultaneously on two levels. This, together with internal ramps in both directions, means more efficient loading and unloading resulting in shorter turnaround times in port. Other modifications include additional bow thrust capacity, as well as installation of hybrid emissions scrubbers and a new ballast water purification system to reduce the ship's environmental impact.

Sister ship Stena Baltica (formerly the Stena Mersey) is undergoing the same extensive conversion and will be ready in the autumn. The two ships were built in 2005 and previously sailed on Stena Line's route between Belfast and Birkenhead. They will now become part of Stena Line's expansion on the Baltic Sea.

Stena Line CEO Niclas rtensson said the delivery oStena Scandica is an important step in the Companys expansion in the Baltic Sea.

"Taking delivery of the large, modern and efficient vessel Stena Scandica is a major milestone for Stena Line and enables us to continue to grow together with our customers in the Baltic Sea. During the year we will increase capacity with 30 % on the Nynäshamn-Ventspils route, and 40 % on the Liepaja-Travemünde route". 

Refurbishment includes

  • 36-meter extension (total new length, 222 meters)
  • 30 percent increased cargo capacity (total 2875 length meters)
  • 80 new cabins for a total of 202
  • Increased passenger car capacity with 100 cars
  • New bow section with bow doors and ramp
  • Straight drive-through configuration on two levels
  • New internal ramps
  • Exhaust gas cleaning with hybrid emission scrubbers
  • Flap rudders for better maneuverability
  • Three bow thrusters (compared to the previous two)
  • New purification system for ballast water
  • Modernized passenger areas
  • New shops
  • New lounges with reclining chairs etc
  • New aft sundeck

About the ships

Names: Stena Scandica and Stena Baltica
Built: In 2005 at the Cantiere Navale Visentini shipyard
Modified/extended: 2021 at Sedef Shipyard in Tuzla, Turkey
Length: 222 meters
Passenger capacity: 970
Cargo capacity: 2,875 cargo meters & separate vehicle deck
Cabin capacity: 202

For more information, please contact:

Per Westling, Managing Director, Stena RoRo AB
Phone: +46 31 855154
Email: per.westling@stena.com

Stena Line Press OfficePhone: +46 704 85 85 32
Email: press@stenaline.com

Since 1977, Stena RoRo has led the development of new marine RoRo, cargo and passenger concepts. We provide custom-built vessels, as well as standardized RoRo and RoPax vessels. The company leases about fifteen vessels to operators worldwide, both other Stena companies and third parties. Stena RoRo specializes above all in applying its technical expertise to the design and production of new ships and the conversion of existing ships for delivering tailored transport solutions to its customers. We call this "Stenability". Since 2013, we have been responsible for the design and completion of Mercy Ships' new hospital vessel the Global Mercy – the world's largest civilian hospital ship.www.stenaroro.com

Stena Line is one of Europe's leading ferry companies with 37 vessels and 17 routes in Northern Europe. Stena Line is an important part of the European logistics network and develops new intermodal freight solutions by combining transport by rail, road and sea. Stena Line also plays an important role for tourism in Europe with its extensive passenger operations. The company is family-owned, was founded in 1962 and is headquartered in Gothenburg. Stena Line is part of the Stena AB Group, which has 15 700 employees and an annual turnover of around 37 billion SEKwww.stenaline.com

This information was brought to you by Cision http://news.cision.com

https://news.cision.com/stena-roro/r/stena-roro-has-now-taken-delivery-of-the-lengthened-vessel-stena-scandica-from-the-turkish-shipyard,c3370050

The following files are available for download:

 

Source: Stena RoRo
collection